Making Your Uwn Compost Bin (part 2 of 2)

Just keep in mind that you will need to have quick access to the compost pile to turn it over at least once each weak. You can create a doorway from the wire mesh or you can make your enclosure in such a way that you can easily lift and put back the whole enclosure.

Also, if you have some left over wooden slats from an old fence or wooden planks from an old shed, I’m sure you can assemble a quite sturdy compost bin in your backyard. Just make sure to let the air in by allowing spaces between the wooden boards. This will keep the air flowing inside the compost pile make decomposition quicker. If you have enough loose boards lying around, you can create a dresser-type compost bin complete with a door with hinges for easy access to the compost pile.

You can even fashion one from your garbage can. Look for an old can where you can afford to experiment without being scolded by your wife or your mother later one. What you need to do is punch a couple of holes in your garbage can to allow the air to circulate in the soon composting materials. You just put your composting materials inside the can. Before you cover it, wet the materials inside until they appear damp.

You can turn over or roll it around to let the materials mix while always keeping the compost pile damp. When storing the trashcan compost bin, if would be best to place it above ground. In a month or so, you should be able to get satisfactory results from all your effort.

You see, making your own compost bin is very easy. You just need to consider the following fundamentals: air should flow inside the bin, you should have quick access to the compost pile, and you should be able to wet the pile when needed.

http://www.bromotravelindo.com